CONTAC INFUSION PUMP - CMS-750

INTRODUCTION

• The device drives the liquid medication to spray to small panel by the high-speed air flow produced by the compressor, then the liquid medication will change into atomized particles which are spurted out by the outlet.
• The tiny medication particles easily arrive lung and bronchus along with breathing, which are directly absorbed by human body, features in medication amount. It is applicable for use in hospital, clinic and family.

PERFORMANCE

• Power supply: Alternating Current
• Nebulization rate: >0.15mL/min
• Residual volume: ≤ 0.7mL
• Noise: ≤ 65 dB (A)
• Gas flow: >10L/min
• Maximum pressure: 200 ~ 450 kPa
• Median particle diameter: 3.3 μm, error: ≤ ±25%
• Equivalent volume particle diameter distribution: the proportion of particle diameter below 5 μm is not less than 60%
• Cup capacity: 8 mL
• Safety class: class II equipment, type B applied part
• The degree of waterproof and dustproof: IP22
• Mode of operation: continuous operation
• Operation environment:
  • Temperature: 10°C ~ 40°C
  • Relative humidity: 30% ~ 75%
  • Atmospheric pressure: 700 hPa ~ 1060 hPa

FUNCTION

• One-button operation.
• Liquid nebulization function.
• Power indication function.
• Adjustable nebulization rate.

Accessories

• One User Manual
• One set of nebulization accessory
• Two fuses
• One bag (5) of filter cotton

Physical characteristic

• Dimension: about 160 mm × 161 mm × 107 mm
• Weight: about 1.42 kg